2-4 Cullen Place
Smithfield NSW 2164
ABN：90 000 955 564
TEL：+61 2 9757 2288
FAX：+61 2 9757 2322
Kenrahn LEVEL REGULATORS can be supported on their own double insulated PVC cable and easily adjusted to the switching level by raising or lowering the cable.
To prevent tangling, a brass weight is provided to submerge the float chamber when the level rises.
The switch action takes place as the float chamber passes the horizontal plane.
The float chamber should be approximately 60 mm from the weight.
The distance is not critical, as the switching action takes place on the horizontal.
Please note that this style of level regulator is suitable for fine control of levels and will switch "ON" and "OFF" at approximately the same point.
For manual control only one level regulator is required, where as two or more
are required for fully automatic systems.
Complete pumping systems with starters and level regulators to suit many applications are available from KENRAHN. There are standard twin pump panels to suit automatic control of sewage and storm water systems with audible or visual alarms.
CR Style = Close on Level Rise
= Open on Level Fall
= N/O Normally Open
= PVC up to 65 Co